| Customization: | Available |
|---|---|
| Design: | Dial |
| Material: | Alloy |
|
Still deciding? Get samples of US$ 10/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product description:
Note: it is not easy to use in damp area.
1. Outer diameter of lock body: 92* 49mm
2. Effective length of shell: 23.5mm;
3. Rotation Angle: 90 degrees
4. Lock shell material: ABS
5. Key material: hpb59-1 brass
6. Blade material: hpb59-1 brass
7. Surface color: gray
8. Packing quantity: 100 pieces
9. Minimum order: 100 sets (1% of the standard key
10. Tailpiece can be customized according to customer needs
13. The key can be increased or decreased as required, and the cost is calculated separately;
Scope of application: storage cabinets, storage cabinets, storage cabinets, all kinds of filing cabinets, locker, etc.
Now 9501 has been upgraded to 9501S, please consult customer service before shooting
The electronic specification of 9501S is as follows:
1. Battery installation:
Please use the key to unlock the lock for the first time. After the key is inserted, rotate 90 degrees clockwise to unlock the lock.After unlocking, please install two no.7 batteries (alkaline batteries are recommended) in the battery compartment on the back of the lock body, then lock the cabinet, remove the key and keep it properly.
2. Set password (the user password is set in the same way as the administrative password) :
Factory password: user password is "1";Management password is "6"
The password is made up of 1-12 digits and can be stored for a long time after power failure.
First password setting: press 1 (note: 1 is the factory password) → press C → enter new password (example: 123456) → press OK, and the new password will take effect after hearing the long tone (di ~).
Change password method: enter the old password → press C key → enter the new password → press OK key → the new password takes effect
3, unlock: after entering the password, press OK and turn the knob to unlock
Enter the password set on the keyboard. Each press will be prompted by sound and light, indicating that the input is valid. Press OK after the input.If the password is correct, the green indicator light will be on and there will be a long sound (di ~) prompt. At this time, you can turn the knob clockwise to unlock the lock.If the knob is not turned during the opening, the combination lock will automatically reset the lock.If the password is not correct, there will be a double tone (tick) prompt, indicating that the input error, please re-enter the correct password.
4. Lock:
Turn the knob counterclockwise to the lock position to lock.
5. Automatic alarm:
If the password entered four times in a row is wrong, the combination lock will alarm.The alarm will last for 60 seconds. During this period, enter the correct password and press OK to cancel the alarm.This feature prevents others from cracking passwords.
6. Power shortage tip:
When the battery is low, it will beep three times when opening the lock, and the red light is on.The lock can be unlocked about 100 times when the battery is exhausted. Please replace the battery as soon as possible.
7. Emergency lock opening:
Due to insufficient power, it is impossible to unlock the lock. The key can be used to unlock the lock.The key is only used for emergency unlock, and the battery should be replaced immediately after opening the door.
8. Emergency decoding:
When the user accidentally forget the password, can first use the key emergency unlock.
1) after opening the lock, press the clear code key on the back of the lock, and after hearing the long tone (di ~), the user's password will be restored to the factory password.
2) after opening the lock, long press the clear code key on the back of the lock for 5 seconds. After hearing the long tone (di ~) twice, the management password will be restored to the factory password.
){kind=link}