Tsa Combinaton Padlock, Master Key Lock, Torch Trademark Padlock

Combination padlock with master key lock
TSA -2003-1
MATERIAL: ZINC ALLOY MATERIAL
Instruction:
I. Manufacturer combination:
1. Manufacturer combination code set at 0-0-0. When setting combination
Wheels to 0-0-0, it's unlocked status, you can pull up the shackle and lock
Something.
2. Press down the shackle to the shackle channel(it's normal if you feel tigh or
Unsmooth when you press down the shackle)then adjust combination
Wheels randomly to lock
1. Way#1 General Reset Mode (you can choose this way to reset combination
If you REMEMBER the combination code )
. II To reset combination code(. Two operation ways)
1-1. When setting combination wheels to correct combination code, you can pull up the shackle.
1-2. The shackle rotates to 180 degree.
1-3 To press down the shackle. Then you can reset the combination code to your desired code
1-4. To pull up the shackle, then the reset action is done
.
2. Way#2 Another Reset Mode(you can choose this way to reset combination
If you FORGET the combination code )
2-1. Refer to step IV-1. IV-2
2-2. To press down the shackle, then you can reset the combination
Code to your desired code.
2-3. To pull up the shackle. Then the reset action is done.
III. Open the lock by key
1. To insert the key and rotate to the end(about 130 degrees).
2. When rotate the key, the shackle channel will descend. The lock is open.
3. To rotate the key back to inital position(Make sure the shackle aim at shackle
Channel then rotate the key), and then will find the shackle channel is up, if the
Shackle lay inside shackle channel, and then it is locked.
IV. How to find out a setting combination
Code when you forget it?
1. Make sure the Re-finding hole face is upward. To insert the key and rotatc to the end
(about 130 degrees).
2. Now you can turn the shackle freely. To press the shackle softiy and let
Lock body slant(this action will help the user to recognize the Red sign casily. See
Above figures). Please try to rotate the combination wheel one by one. If you see
The Red sign from Re-finding hole while rotating, that means your code is correct.
Combination wheel
3. Turn the shackle back to initial position and pull it up (if you press the shackle
Mindless. Pless refer to remark instruction). Then release the shackle. Also turn
The key back to initial position and pull it out. Now the shackle channel is up.
4. Let the shackle aim at shackle channel then press down the shackle. Please make sure
The shackle lay inside shackle channel then rotate the combination wheels freely.
It's locking now.
1. If you press down the shackle mindless when you execute
Above step IV-2, it will be changed to reset code status.
The code will bechanged if you turn around the combination
Wheel that time.
2. You can't rotate the combination wheel when the shackle
Was pull up
3. Suggestion: Please don't apply pull force for shackle more than
Kgf for safety consideration.
Remark:
20
Press down shackle